AJ's Shoes catalog offers a wide selection of road racing bike shoes, high performance cycling shoes, mountain bike shoes, casual shoes and running shoes.
Stripped, worn-out—whatever happened to your three-hole cleat attachment is between you and your shoes…or maybe between your shoes and your cleats. Either way, Specialized has a T-Nut replacement kit that's easy to install and even easier than buying a new pair of shoes.
$6.00 $11.00 45% Off
Replacement 2Density insoles Fits all Giant & Liv non-MES road and mountain shoes - Giant Phase - Liv Mova - Giant Transmit - Giant Phase 2 - Liv Regalo - Giant Flux - Liv Fera
Replacement studs for Louis Garneau MTB and cyclocross shoes Contains - Four 8mm-tall studs - Stud-remover tool.
- 2 anti-slip platforms and 6 screws (4 x 17 mm) - Fit on all combined SPD and road outsoles - Convenient for stability and walking and are easy to clip on
Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection
$10.00 - $11.99
Your S-Works Road shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works Road shoes. - Fits 2013 and 2014 S-Works Road shoes - Heel lug only - Sold in pairs; includes screws
Replacement ratchet strap for all shoes with SL buckle closure. - Sold in pairs - 2011 D-Link replacement straps: Used on 2011-12 Pro Road and 2011-12 Pro MTB shoes with no screw attachment. - 2011 D-Link replacement straps. Used on Pro road and MTB shoes for 2011 - 2009 X-Link replacement straps: Used on 2009-10 Pro Road and 2009-10 Pro MTB shoes with Phillips head screw attachment. - 2009 X-Link replacement straps. Used on Pro road and MTB shoes from 2009 and 2010
Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws
Replacement tread for S-Works 7 Road shoes. - Heel Lugs only. - Sold in pairs with screws.
$15.00 - $16.99
Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws
Replacement Ti/Alloy T-Nuts for the S-Works 6 and S-Works Sub6 road shoes.
DeFeet's Slipstream Shoe Covers fit snugly over your shoes to shield you from the cold and provide an aerodynamic advantage too. They also protect your shoes from weather and debris.
$17.00 - $160.00
Specialized's Comp Road Shoes boast stiff, injection-molded soles for awesome pedal power, supple, breathable uppers for top comfort, and Specialized's excellent Body Geometry insoles that perfectly support your feet. The Comps also have Boa closures and Velcro straps that let you dial in the ultimate fit.
The in-between solution to protect your feet on those chilly days. FABRICS: -I SO LITE: Provides warmth in cool weather - ANTISLIP 3 MM NEOPRENE : Isolates from cold, provides warmth and durability DETAILS: - Cleat opening under sole - Flatlock seams: Enhanced comfort - Reflective puller
Wore out the laces on your S-Works Sub6 shoes? Don't fret, Specialized has your replacement laces right here. Now lace 'em up and get riding. - 110cm: Shoe Size 36-41 - 120cm: Shoe Size 41.5-43 - 130cm: Shoe Size 43.5-45 - 140cm: Shoe Size 45.5-49
- Replacement ratchet set for selected styles of Garneau's shoes - 2 pieces
S2-Snap BOA cartridge assembly kit for personalizing your shoes. Includes: One left cartridge dial assembly, one right cartridge dial assembly, two laces. Compatible with the following models: - S-Works Road - S-Works XC - Women’s S-Works XC - Pro XC - Women’s Cascade - Rime Expert - Comp MTB - Women’s Motodiva
Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low profile - Replaces without tools
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
The Transfo 3D Insole is quite simply the lightest insole on the market. Offering a simple and easy way of customizing the arch support that your foot receives, this is an innovative means of improving overall comfort on the bike and reducing the chance of long-term injury. Simply remove and replace the inserts based on how much arch support your foot requires. The non-slip surface of the underside of the insole locks it in place against the footbed of the shoe, while the Ergo Air ventilation system preserves airflow. The insole can be adapted to all types of cycling shoes, for both men and women. - Unisex - Arch support: Low/Med/High adapted arch profile ensures maximum foot contact for optimal support - Ergo Air: Provides through-and-through ventilation - Removable arch: Patent-pending anchoring system allows for an easy and customized adjustment - Under insole: The non-slip surface maintains insole in place
Need to replace your buckle? Bont's Standard Buckle Kit includes a pair of buckles, loop, a pair of ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Standard buckle with a Slimline buckle.
Wear down the bottom of your shoes from too much cycling? The Toe and Heel Pad Set includes 4 pieces of rubber for a pair of your favorite Bont shoes along with screws to keep them in place.
If you lost or damaged the Warp Sleeve on S-Works Sub6 road shoes, you have no reason to fear—Specialized has the replacement. Pick up a pair and start saving those seconds again.
- Wind-resistant fabric - Microfleece lining - Reflective logo
Want one shoe piece to cover the entire road or mountain biking season? The Neo Protect 3 Shoe Cover is the one for you! Extremely durable, warm, and has easy adjustments with very wide side hook-and-loop fasteners with large locking zippers for easy use, this shoe cover is the only one you'll need all season long. It provides 360 degrees of reflectivity for added visibility in low light conditions, a reinforced Kevlar track under the foot with Hypalon rubber for long term walkability, and provides all-season wind and water resistance. - Cuff: Bias - Under Sole: 2 openings for road and SPD cleats - Side opening: Seam-sealed hook and loop fastener for easy slip-on - Visibility Features: Reflective - Fabric: 2 MM NEOPRENE – Isolates from cold, provides warmth
Make sure your gear is working for you during your next aero event. Giant's Aero Shoe Covers help smooth airflow over your feet and reduce drag. Stretchy Lycra covers with sublimated graphics and a back zipper closure make it easy to get these covers over your shoes.
- ProTextura PLUS Wind and water proof PU coating with critical front seam taped - ThermTextura Thermal brushed fleece inside - Back locking zipper with Velcro closure - Tough: Wear proof bottom piece - Reflective prints on the toe and along the zipper welt for additional visibility
Depending on where you live and ride, full shoe covers might be a little too aggressive for the conditions at hand. That isn't to say that it isn't cold, though—you just might be better suited with something like Specialized Element Windstopper Toe Covers, instead. These toe covers feature a Gore Windstopper Soft Shell construction that ensures superior levels of breathable insulation, plus reliable resistance to both wind and water. The result? Warmth and protection right where you need it, without running the risk of overheating. - Gore Windstopper Soft Shell provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Small/Medium: sizes 38 – 43 - Large/X-Large: sizes 44 – 48
When warm socks aren't enough, but waterproof shoe covers are too much, our Reflect Overshoe Socks are your ticket to warm toes. They're made from an abrasion-resistant, knitted yarn that not only adds an extra layer of warmth, but ensures you'll be using them for seasons to come. At the top of the overshoe, you'll find a reflective band that helps increase your visibility in low light conditions. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibility to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.
- ProTextura™ outer fabric - ThermTextura™ inner fabric - Back zipper - Reflective accents
Page 1 of 8 Next page